Electrical Power Systems Lab

• Generation, Transmission, Distribution & Consumption Stagy
• Supervision & Control of power system by SCADA software
• Study of industrial component from global manufacture such as ABB
• Simulation od real word IEC- Compliant or systems
• Generator station commissioning & shutdown
• Logical blocking system (Isolator, Circuit Breakers and the PLC)
• Turbine operation & characteristics
• Generator operation characteristics
• Generator synchronous reactance
• Transformer short-circuit characteristics
• Transformer impedance
• Grid synchronization
• Turbine control fault
• Generator/transformer regulator fault
• Generator/transformer Differential faults
• Generator stator Earth Faults
• Transformer neutral point Earth faults
• Earth Faults
• Outgoing HV substation Earth Fault
• Generator load characteristics
• Generator/transformer excessive loading
• Generator/transformer load loss fault
• Programmable dynamic load simulation.
• Single phase Combined RLC loads
• Industrial 3 phase loading
• Load Unbalance
• Power factor and Reactive power compensation in loads
• Line vector representation and the Pi model
• Line model calculation including ISF, impedance scaling factor
• Cable model calculation including ISF, impedance scaling factor
• Voltage drop on HV transmission lines
• Voltage drop on MV transmission lines
• Voltage drop on MV underground cables
• Determining line impedance
• Determining line capacitance
• Petersen coil earth fault reduction
• Power quality and reactive compensation on lines
• Line capacity
• Connection of double line system (main + backup) to load including fault clearance procedure.
• Step-down Transformer neutral point Earth faults
• Substation Earth Faults
• HV/MV Busbar Earth Faults
• Phase discontinuity fault: severed MV line fault
• Outgoing MV Line Auto reclosing
• Relay protection sectioning , complete system
• Simulation of Line faults / Feeder faults in complete system
• Step-down transformer characteristics
• Blackout, Regional area
• Blackout, section of a medium sized city
• Blackout, medium city region
• Remote access of measurement instruments
• Remote control of turbine and generator
• Remote switching of power routes
• Remote synchronization Remote identification, acknowledgement and clearance of faults
• Remote fault connection via auxiliary CBs
• Remote load control
• Remote parameter setting in IEDs
• Real-time 3-phase vector presentation on lines
• Access disturbance records in protections IEDs
• Disturbance record interpretation of analogue and binary signals
• Sectioned Generation/Distribution control
• Building a SCADA page
• Compensation of inductive loads
• Dimensioning capacitor banks
• The C/k parameter
• Linear switching
• Cyclic switching – maximize the lifespan of the banks
• Normally delayed switching
• Integrally delayed switching
• Daytime vs. Nighttime power factor correction
• Power systems in oil drilling rigs & propulsion systems